Facials & Peels
BioRePeel®
Two-phase peel for complexion and skin texture
At a Glance
In Brief
Two-phase peel with trichloroacetic acid
Treatment Duration
45–60 minutes
Pain
Generally well tolerated, slight tingling possible
Anaesthesia
Not required when used on its own
Downtime
Usually none, minimal flaking possible
Results
Initial changes possible after the first session
Duration of Effect
Depends on skin condition, lifestyle and skincare
Sessions
Usually a course of 4–6
Price
From CHF 200 per session
BioRePeel® is a biphasic peel, meaning a peel made up of two phases, which gently removes dead skin cells while revitalising the skin. The BioRePeelCl3 formula contains trichloroacetic acid, fruit acids, vitamins and amino acids. It supports the hydrolipid film, a natural protective layer on the skin, and provides the skin with moisture.
The treatment may be considered for selected concerns such as blemish-prone skin that tends towards inflammation, uneven skin texture or pigmentation spots. At the initial consultation, we assess your skin and decide together which areas to treat and how many sessions are planned.
Treatment Areas
Before the first session, we assess which of these areas and concerns are suitable in your case.
Blemish-Prone Skin
BioRePeel® is particularly effective on blemish-prone, acne-prone skin with blackheads. The peel has an antioxidant and antibacterial effect, refines the pores and helps the complexion look more even.
Fine Lines
On the face, the peel can smooth fine lines and refine skin texture. By promoting collagen and elastin production, it can also improve the skin’s elasticity.
Pigmentation
For pigmentation spots, hyperpigmentation and melasma, a form of pigmentation disorder, the product can be applied selectively. Over several sessions, skin tone is evened out and pigmentation is noticeably reduced.
Acne Scars
Where acne scars or uneven texture remain after a period of blemished skin, the complexion is noticeably improved after several treatments. A course of sessions is planned for lasting results.
Neck and Décolleté
The delicate skin of the neck and décolleté is treated with the same formulation as the face. Its moisturising effect can soften signs of ageing and improve skin texture.
Stretch Marks
For areas of the body with stretch marks, the BioRePeelCl3 Body formulation effectively tightens the skin. Visible tightening can be seen after several sessions.
What is BioRePeel®?
BioRePeel® originates from BioReTherapy and is a biphasic peeling system for medical aesthetic use. Its name reflects its three principles of action: biostimulation, revitalisation and peeling. The formula contains 35% trichloroacetic acid (TCA), complemented by hydroxy acids (AHA, BHA, PHA), salicylic acid, amino acids such as arginine, vitamins and GABA (gamma-aminobutyric acid).
As dead skin cells are gently removed, BioRePeel® preserves the hydrolipid film, provides moisture and activates biosynthetic processes such as collagen and elastin production. This creates an exfoliating effect without heavy peeling. The application time is 3–10 minutes and is adapted to the treatment area and skin condition.
BioRePeelCl3 FND is used for the face, neck and décolleté, and BioRePeelCl3 Body for areas of the body. Combining the peel with other treatments is possible and is planned individually.
- Two phases in one formula
- 35% trichloroacetic acid with hydroxy acids
- Preserves the skin’s hydrolipid film
- Application time of 3–10 minutes
- Formulations for face and body
Why BioRePeel® at Aesthetics Medical?
Several Principles of Action
In a single treatment, BioRePeel® exfoliates, biorevitalises, provides antioxidant action and moisturises. The peel removes dead skin cells while supplying the skin with moisture.
Short Application Time
The application time is short and adjusted to your skin, and the hydrolipid film is preserved. Both contribute to how well the peel is tolerated, making it suitable for all skin types, including sensitive skin.
Applied and Massaged In
The gel is applied to the skin and gently massaged in until it has been absorbed. A BioRePeel® treatment on its own requires neither needles nor anaesthesia.
The Right Formulation
Facial skin and body areas each have their own formulation. Which one is used depends on the area being treated.
Approved Product
BioRePeel® is CE-certified. We work with the original formulation and follow the intended application steps.
Clear Information
Before the first session, we discuss suitability, possible skin irritation, downtime and aftercare with you. You also learn which medication or skin conditions would rule out treatment.
What does the treatment involve?
Consultation
We analyse your skin type and condition and clarify your goals. Together, we discuss which areas are suitable and how many sessions are likely to be appropriate. Please let us know if you take any medication or have a skin condition.
Preparation
The area to be treated, such as the face, neck, décolleté or a part of the body, is thoroughly cleansed. The peel can then be applied straight away.
Application
The two phases of the product are combined into an emulsion, drawn up with a cannula and applied to the skin. The gel is gently massaged in until absorbed and then left to act for 3–10 minutes.
Cleansing and Care
After the application time, the area is cleansed with water. A BioReHydra serum or BioReLift cream is then applied. Both products contain ingredients such as seaweed extract and micronised hyaluronic acid and moisturise the skin.
Aftercare
Depending on the intensity of the treatment, the skin may flake minimally over the following 3–5 days as part of its regeneration. During this time, protect your skin from direct sunlight and use sunscreen regularly.
Further Sessions
A course of 4–6 treatments is usually planned, at intervals of 2 weeks for the face and 3 weeks for the body. The full effect develops over the entire course.
| Face | CHF 200 per session |
| Face and neck | CHF 250 per session |
| Face, neck and décolleté | CHF 300 per session |
| Other treatment areas | on request |
You will receive the exact cost for your areas and planned course after the initial consultation.
Frequently Asked Questions
How does the treatment work and how long does it take?
After cleansing, the two-phase peel is applied to the skin, gently massaged in and removed with water after an application time of 3–10 minutes. A nourishing serum or cream is applied at the end. The appointment takes around 45–60 minutes in total.
Is the treatment painful, and is anaesthesia used?
The treatment is generally well tolerated. You may feel a slight tingling while the peel is working. A BioRePeel® treatment on its own does not require anaesthesia, while an anaesthetic cream is applied beforehand for certain combination treatments. We discuss the planned approach with you in advance.
What risks and side effects are possible?
Individual skin reactions, such as mild irritation of the treated skin, are possible. Depending on the intensity of the treatment, minimal flaking may occur during the 3–5 days afterwards, while the skin itself stays intact. Individual risks and your suitability are discussed in detail during the consultation before the first session.
What should I consider before the treatment?
Please tell us in advance about any medication you take and any existing skin conditions. The treatment is not carried out while you are taking medication containing isotretinoin, photosensitising medication that makes the skin more sensitive to light, or high-dose vitamin A tablets. Before your appointment, you also receive clear instructions on how to prepare.
What should I consider after the treatment?
Protect the treated skin from direct sunlight for the first few days and apply sunscreen regularly, as the skin can be more sensitive to the sun after treatment. Minimal flaking is part of the skin’s normal regeneration process. You can wear make-up if needed, and you receive your personal care instructions directly after the session.
How long does recovery take after the treatment?
Downtime is usually not needed after BioRePeel®. You can return to your usual activities, including exercise, straight after the treatment. Depending on the intensity of the treatment, minimal flaking remains possible for a few days.
Show all 11 questions
When do results become visible?
Initial changes in the appearance of your skin may be visible after the first treatment. The full effect develops over the entire course, which usually comprises 4–6 sessions. We discuss beforehand what you can realistically expect for your skin concern.
How long do the results last?
How long the effect lasts varies from person to person and depends on your lifestyle, your skin’s starting condition and regular skincare. After the treatment, we discuss with you which skincare suits your skin.
How many sessions are usually needed?
The number depends on your skin concern and your goals. A course of 4–6 treatments is usually recommended, every 2 weeks on the face and every 3 weeks on the body. More sessions may be needed for blemished skin or scars.
Who is the treatment suitable for?
BioRePeel® is suitable for all skin types and can be used in any season, for blemishes, uneven texture or pigmentation concerns. The treatment is not carried out in cases of active skin rashes, skin conditions such as herpes, eczema or atopic dermatitis, skin allergies, or during pregnancy and breastfeeding. We assess your suitability during the consultation.
How much does the treatment cost?
The prices apply per session: face CHF 200, face and neck CHF 250, and face, neck and décolleté CHF 300. Prices for other areas are available on request. Aesthetic treatments are usually paid for privately.
Personal Consultation
Start now.
Every treatment starts with a conversation and a 3D analysis.